Desoutter Industrial Tools will host a free webinar on 25 November 2026, tackling a common challenge in robotic assembly: what happens when a component isn't quite where the robot expects it to be?
Running from 12:30 to 13:15 GMT, the session will explore how small differences in positioning can disrupt automated fastening and drilling, and how 3D vision can help manufacturers keep production on track.
On paper, a robot returns to the same programmed position, cycle after cycle. On the factory floor, however, the parts it works on aren't always quite so predictable. An automated guided vehicle (AGV) might stop short of its intended location, or a component might shift while the main assembly stays fixed. For fastening and drilling operations, even a small difference between the tool and the assembly point can interrupt production, require manual adjustments or compromise quality.
Mechanical positioning systems can help control this variation, but keeping every component in exactly the right place isn't always practical. Adding more fixtures or positioning steps can also make an automated process more complicated, particularly when production requirements change.
"Manufacturers put a lot of effort into making sure components arrive in the right position for automated assembly," explained Alexander Hale, product manager at Desoutter. "Fixtures and positioning systems are an important part of that, but there's a limit to how much variation it's practical to eliminate mechanically. The question is whether you can give the robot enough information to deal with those differences.
"That's what we'll be looking at during the webinar. We'll show how 3D vision can help robots find the correct fastening or drilling point, even when a component has moved from its expected position. We'll also explore where this approach could be useful on existing production lines, as well as in new automation projects."
The webinar will use practical manufacturing scenarios to demonstrate where vision guidance can make a difference. Attendees will learn how to identify positioning challenges in their own production processes, assess where Automated Robot Guidance (ARG) could be introduced and understand how it works alongside other automation technologies.
ARG uses a compact, tool-mounted 3D camera to detect holes, bolts and other assembly features. It can identify multiple features in a single image acquisition and process and send positioning coordinates in less than one second, giving the robot the information needed to locate the correct fastening or drilling point.
Using practical manufacturing scenarios, the session will cover positioning differences on conveyors and AGVs, components that move during assembly and situations where fixed positioning may be restricting production performance. Attendees will also learn how ARG can work alongside other automation technologies and where vision guidance could be introduced to improve existing production lines.
Unit 2 and 3, John Bradshaw Court
Alexandria Way
Congleton Business Park
CW12 1LB
UNITED KINGDOM